RM2060 WIRED LASER
5+1 BUTTONS MOUSE
USER’S MANUAL
Thank you for purchasing a quality Rosewill Product.
support for your product.
Getting Started
Congratulations on your purchase of LASER 5+1 button mouse. LASER
mouse is the last technique of mouse industry. The most important feature for
LASER mouse is that can work on most of shining surface and glass. In
additional, its high resolution, 800/1600 hardware dpi, provide users a great
experience to operate.
Package Contains
Your RM2060 Mouse package includes the following:
1. RM2060 LASER mouse
2. User’s manual
3. CD-ROM Driver for Windows OS
Note：If any part is missing, please contact your dealer for a replacement
immediately.
Hardware Installation Guide
Step 1. Plug the USB connector to Computer
1. USB is a PnP device; you can plug the device no matter the computer is on
or off. Of course, you can remove USB device in the same way.
2. If the device is HD or pen drive or any device which can store files, stop the
device than remove is the best way to protect the files.
Step 2. Waiting for new device detection
1. If your system is Windows ME/ 2000/ XP, windows will find a new device and
install standard driver automatically.
2. The standard software only support standard functions and will not support
special one of the mouse.
Software Installation & Operation Guide
To install the software, please follow the steps below to finish:
1. Insert the Auto-Run CD-ROM onto CD-ROM driver, the installation menu
will be executed automatically. (If the auto-run does not function itself, double-click
RRM2060 User Manu_0917.doc
Page 2 of 6
1st Edition
the “setup” icon in the CD files.)
2. The setup program will guide you to finish the installation step by step.
3. After you finish the installation, select "Restart" to reboot your system and activate
multimedia hot keys and wheel scrolling functions.
4. After installed the driver, a symbol will show in the right hand side of working bar.
Programmable Office-Web Hot Keys
ꢀ
When you install the included software driver the mouse hot keys will be enable
with driver default.
ꢀ
The Office-Wheel Function is attached on the mouse software as following.
Users can change the default function of wheel and extra hot-keys.
Default setting for these hot keys is programmable as following as shown on the
application by running the “Office-Web Wheel Center” as following:
ꢀ
Dpi switch button
Office Wheel
Tilt Wheel
Web Wheel
RRM2060 User Manu_0917.doc
Page 3 of 6
1st Edition
GENERAL SPECIFICATIONS
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
High-tech VCSEL LASER mouse
1,600dpi hardware resolution
800/ 1,600 Dpi switch
Power Rating: 5V DC / 30 mA
5+1 buttons design with tilt wheel
Programmable hot-keys
Office hot button
Internet hot button
Right hand Ergonomic design for comfortable grip.
Operating Temperature Range:5℃ ~ 45℃
Troubleshooting
MOUSE NOT DETECTED
z
z
z
z
Please note that USB port needs driver to active in Windows 95/ 98/ NT, or the
USB mice will not working.
Make sure the mouse cable is plugged into the correct port-USB. An USB mouse
connects only to a USB port.
Make sure your USB port has the proper configuration. Refer to your computer
documentation for the correct port configuration.
You may have other system devices (e.g. a modem card) that conflict with the
mouse. Check the IRQ/address settings of these devices for conflicts, and
change the setting as required. Refer to your computer documentation to make
these changes. Determine whether the problem is mouse or system related, try
the mouse on a second system or a different mouse on your current system.
Note: If mouse is not be detected and you installed driver already, a symbol will be
showed in the right hand side of working bar. (as the photo as follow)
RRM2060 User Manu_0917.doc
Page 4 of 6
1st Edition
Electromagnetic Characteristics (EMC)
Tested to comply with FCC standards
For home or office use
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
ꢀ
CE - Type acceptance: EN55022/EN55024 I.T.E. Product
Thank you for purchasing a quality Rosewill Product.
support for your product.
RRM2060 User Manu_0917.doc
Page 5 of 6
1st Edition
|